|
Stories tagged with: san
San Antonio Discount Real Estate Broker & Flat Fee MLS - Buyer Rebates - Client Side Realty
2 / 0
 
http://www.clientsiderealty.com/san-antonio-discount-real-es...
If you want to save money on your next real estate transaction, and have the secure back-up of a knowledgeable and experienced real estate agent, one who knows the area best, you have just found us.
Join discussion...
Submitted by sanantonioflat9
9 months, 2 weeks, 2 days, 2 hours agoTags: San Antonio flat fee mls listing, San Antonio flat fee, san
Openfiler 2.3 Active/Passive Cluster (heartbeat,DRBD) With Offsite Replication Node
26 / 4
http://www.howtoforge.com/openfiler-2.3-active-passive-clust...
Openfiler is a Linux based NAS/SAN application which can deliver storage over nfs/smb/iscsi and ftp. It has a web interface over that you can control these services. The cluster we build will consist of two nodes replicating each other and taking over services and storage in case of emergency. Furthermore we have an Offsite Replication Server, which ideally stands in a physically different position and replicates the configurations/storage from which ever node is active. In case of emergency this Offsite Replication Server can be used to restore the cluster and to deliver the services.
Join discussion...
Submitted by falko
12 months, 1 week, 3 days agoTags: openfiler, storage, san, NAS, nfs, smb, iscsi, heartbeat
Using iSCSI On Ubuntu 10.04 (Initiator And Target)
28 / 1
http://www.howtoforge.com/using-iscsi-on-ubuntu-10.04-initia...
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Ubuntu 10.04. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
Join discussion...
Using iSCSI On Ubuntu 9.04 (Initiator And Target)
25 / 4
http://www.howtoforge.com/using-iscsi-on-ubuntu-9.04-initiat...
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Ubuntu 9.04. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
Join discussion...
Submitted by falko
31 months, 3 weeks, 2 days, 2 hours agoTags: iscsi, storage, san, ubuntu, initiator, target
Distributed Replicated Storage Across Four Storage Nodes With GlusterFS On Debian Lenny
27 / 2
http://www.howtoforge.com/distributed-replicated-storage-acr...
This tutorial shows how to combine four single storage servers (running Debian Lenny) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Debian Lenny as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 servers with SATA-II RAID and Infiniband HBA.
Join discussion...
Submitted by falko
32 months, 3 hours agoTags: glusterfs, storage, san, high-availability, debian, raid
Distributed Storage Across Four Storage Nodes With GlusterFS On Debian Lenny
27 / 2
http://www.howtoforge.com/distributed-storage-across-four-st...
This tutorial shows how to combine four single storage servers (running Debian Lenny) to one large storage server (distributed storage) with GlusterFS. The client system (Debian Lenny as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 servers with SATA-II RAID and Infiniband HBA.
Join discussion...
Using ATA Over Ethernet (AoE) On Fedora 10 (Initiator And Target)
25 / 4
http://www.howtoforge.com/using-ata-over-ethernet-aoe-on-fed...
This guide explains how you can set up an AoE target and an AoE initiator (client), both running Fedora 10. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
Join discussion...
Using iSCSI On Fedora 10 (Initiator And Target)
23 / 7
http://www.howtoforge.com/using-iscsi-on-fedora-10-initiator...
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Fedora 10. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
Join discussion...
Using ATA Over Ethernet (AoE) On Debian Lenny (Initiator And Target)
26 / 4
http://www.howtoforge.com/using-ata-over-ethernet-aoe-on-deb...
This guide explains how you can set up an AoE target and an AoE initiator (client), both running Debian Lenny. AoE stands for "ATA over Ethernet" and is a storage area network (SAN) protocol which allows AoE initiators to use storage devices on the (remote) AoE target using normal ethernet cabling. "Remote" in this case means "inside the same LAN" because AoE is not routable outside a LAN (this is a major difference compared to iSCSI). To the AoE initiator, the remote storage looks like a normal, locally-attached hard drive.
Join discussion...
Submitted by falko
35 months, 2 weeks, 3 days, 1 hour agoTags: ata over ethernet, aoe, debian, lenny, san, iscsi
Using iSCSI On Debian Lenny (Initiator And Target)
28 / 1
http://www.howtoforge.com/using-iscsi-on-debian-lenny-initia...
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Debian Lenny. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
Join discussion...
Submitted by falko
35 months, 2 weeks, 6 days, 1 hour agoTags: iscsi, debian, initiator, target, san
| |
En Español